EcoStarter: EGR-1   [en]
Please note that after 8 years of activity
EcoStarter has stopped selling GSM-based
remote control equipment.
 
The company www.maurelma.ch takes over this activity.
 
 

Radio-controlled relay EGR-1
Module with 1 output (relay)
and 2 detector inputs.

For GSM Mini, EcoStarter Touch and ECO-Comfort.
To be installed by an electrician.

 
   
 
 
 
     
Your advantages:

Operating temp.: -20°C to +50°C. Power supply: 12V-15V DC or 230V/50Hz. Verbrauch: 1.4 W (standby).
1 potential-free relay of 16A (i.e. 3600W at 230V/50Hz). Dimensions: 55x90x59 mm (3 DIN modules). Weight: 170g.
Complies with the European R&TTE directive. Designed for indoor use only.
With EGR-1 you control 1 additional output (relay), 1 temperature sensor and 1 or 2 digital detector inputs with your central unit.

  • Typical applications:
    • switching loads (up to 3600 Watts) on and off;
    • thermostat for electric or infrared heaters;
    • thermostatic regulation or change of mode of operation on stoves or central heatings equipped with a contact for an external timer, external thermostat, load-shedding or a remote control;
    • regulation of thermal actuators.
  • 2 digital inputs for detectors of your choice (NO or NC): fire, gas, flooding, burglary, etc. (only 1 input is available when a temperature sensor is connected).

  • 1 input for an optional temperature sensor, for:
    • reading off temperatures remotely;
    • thermostat function with remotely adjustable set points (on-off regulation with 1 degree hysteresis, other values on request);
    • temperature surveillance with notification by SMS whenever a chosen limit is exceeded.

  • Enclosed: a radio antenna (for the local communication with the central unit)
  • Installation as a DIN module
 
Recommended accessories:
OTHER MODELS 
  
 
ACCESSORIES
 
  RELATED PRODUCTS