EcoStarter: compare models

OVERVIEW OF MODELS

Model (click on an image to choose your model)

Category

Ready for use
"plug-and-play"

Fixed
installations⁽¹⁾

12 volts
applications

Ready for use

⁽²⁾

Extensible

• Wireless extensions (433MHz radio frequency)

Power supply

• 230V/50Hz

• 12V DC

• Auto restart after a power outage
(all operating parameters are restored)

Outputs (controlled 230V sockets/switches/relays)

• Included in the base package

• Altogether, via extension modules

max 64

max 5

• Timer control

• Pulse control

via GR-3

via EGR-3

• Thermostatic regulation adjustable by SMS

• Group commands

5 groups

• Programmable hourly day/night week timers

5 timers

• Max load (switching power):

- Per wireless 230V socket ("Schuko" norms)

3600W

- On each potential-free output ⁽³⁾

16A (3600W)

16A/50V (800W)

Inputs (for detectors + temperature)

• Digital + analogic⁽⁴⁾, in the base product

1 ⁽⁷⁾ + 1 ⁽⁷⁾

0 + 1

2 + 2

• Altogether, via extension modules

max 128

Alarms per SMS

• Max number of recipients

• Recipients selectable for each alarm type

• Temperature surveillance

• Compatible with usual detectors

• Power outage

⁽⁵⁾

• Voltage surveillance (of power supply)

Extensions

Wireless 230V socket

Node

ECO-Node

Wireless extension module

GR-1, GR-3⁽¹⁾

EGR-1, EGR-3⁽¹⁾

Wireless wall-mount thermostat

SI-1⁽¹⁾

ECO SI-2⁽¹⁾

Cabled extension module

GS-33⁽¹⁾

Power generator controller

AGG-3

Accessories

Wireless remote control (small RF keypad)

Backup battery

built-in

GSM antenna: directional/omnidirectional

Temperature sensor: wired/wireless

– /

⁽⁶⁾

– /

⁽⁶⁾

/ –

Siren: wired/wireless

– /

⁽⁷⁾

– /

⁽⁷⁾

Movement detector (PIR): wired/wireless

– /

⁽⁸⁾

– /

⁽⁸⁾

/ –

Fire (smoke) detector: wired/wireless

– /

⁽⁸⁾

– /

⁽⁸⁾

/ –

Gas detector (natural gas, propane, etc): wired/wireless

– /

⁽⁷⁾

– /

⁽⁷⁾

/ –

Water detector: wired/wireless

– /

⁽⁷⁾

– /

⁽⁷⁾

/ –

Magnet contact (for doors/windows): wired/wireless

– /

⁽⁷⁾

– /

⁽⁷⁾

/ –

⁽¹⁾	To be installed by an electrician.
⁽²⁾	Optional extension modules for the fuse-box such as GR-1 or EGR-1, as well as the wall-mount thermostats SI-1 or ECO SI-2 are to be installed by an electrician.
⁽³⁾	Do not mix 230V and 12V DC (or lower) voltages inside a single module: the voltage must be roughly the same at the power supply and at the output/relay contacts of any given module. In order to mangage mixed 230V/12V voltages, please make sure to either use separate Sikom extension modules, or contactors, or basic auxiliary relays.
⁽⁴⁾	Digital inputs = for usual detectors (PIR, fire, gas, etc.). Analogic inputs = for measuring temperatures with sensors.
⁽⁵⁾	When equipped with the optional backup battery, the device can send SMS alarms in case of power blackout.
⁽⁶⁾	This accessory is connected to one of the wireless extensions, which itself is controlled by the central unit.
⁽⁷⁾	This accessory is connected to a wireless socket (Node or ECO-Node), which itself is controlled by the central unit.
⁽⁸⁾	This accessory exists in two versions: either as a wireless peripheral directly managed by the central unit, or as a detector connected to a wireless peripheral, which itself is controlled by the central unit.